The ring can't wear it anymore, it's small, what should I do?
5 thoughts on “What should I do if the ring is small? How to deal with it?”
Leave a Comment
You must be logged in to post a comment.
The ring can't wear it anymore, it's small, what should I do?
You must be logged in to post a comment.
If you buy a live ring ring, it is relatively simple. You only need to pull the ring gently to make the ring size grow. However, it is generally used to buy a dead mouth ring, so the size of the ring is not easy to change, but consumers can also try to make the ring bigger in some simple ways, such as:
everyone can be on the Internet on the Internet Buy a ring size measurement stick, which is a cone -shaped metal stick, which is thick and thick. Set the ring on the measurement rod, press the ring hard down, or tap the ring gently with the tools. Essence However, this method is recommended to expand a maximum of one circle number, otherwise it will have a significant impact on the quality of the ring (if it is a ring inlaid with the rings of the gem model, it is not recommended to use this method, which will affect the solidity of the gemstone inlaid and can easily lead to the loss of gems).
What to do if the ring is smaller
1. If the ring is small and does not want to change it, if you want to continue wearing, you can only restore your fingers to the original size by weight loss; or replace it A way of wear, such as through a necklace through the ring to make it a pendant. Such a pendant is very meaningful and more personalized, and you can modify the lines of the neck. Or wear the ring on the fingers with thinner sizes. The size of each finger is different. The original finger cannot be worn. You can wear another finger. Although each finger is different, it is only used as a decoration as a decoration Just wear a ring.
2. If the ring wants to continue wearing and it is difficult to expand its size, then you can only find a professional to modify it. For example, sending the ring to the store to put the ring large, that is, welding a metal of the same material in the middle of the ring, and then polish the ring to restore it to the original state without affecting the quality of the ring. Or use a thin way to make the ring metal thinner, which plays a role in increasing the size. But these two methods should pay attention to the ring style, such as full diamond ring, which is not suitable for these expansion methods.
3. If the jewelry shop that purchased the ring at the beginning has a "replacement of the old" service, it is relatively simple. You can directly send the ring to the jewelry shop to replace a new one. The general method is to replace the new rings of the original ring with double prices, use the original ring to offer part of the price, and the rest requires consumers to make up. Consumers can choose to replace a brand new ring, or they can change other styles. But not all merchants support this new way of replacement.
If you want to change your ring, you must first figure out which ring your ring is. Generally speaking, the ring is divided into a living ring ring and a dead mouth ring. Simplicity is that the living mouth is the ring that is not completely welded and closed, and the dead mouth is a complete section of completely closed. Therefore, if you want to change the ring, it is simple. The living mouth rings only need to pull it gently, and the size can be widened. And the dead mouth ring is very troublesome. Find a cylindrical body of about the same size as the ring diameter, put it in the ring, and wrap it around with cotton cloth around this knock. You can use the ductility of the metal to expand it slightly.
If you want to expand the ring, it is best to find a professional place to change. You can go to a professional jewelry repair shop to use the gold -increase method to change the ring, that is, cut the ring circles from the middle, and then add the same precious metal. Finally, you can welded and polished. You do n’t need to worry about the trace of the ring. After professional jewelry The maintenance master will make the ring smooth as always.
Pay content for time limit to check for freenAnswers are inquiring for youn1. Buy a ring size measurement stick on the Internet, put the ring on the measurement stick, press down the ring hard, or tap the ring gently with the tools. Essence However, it is generally not recommended to use this method. First of all, this method will slightly adjust the size; in addition, improper operation will significantly affect the appearance and quality of the ring. 2. Get the ring to a professional jewelry shop or jewelry repair shop and find a professional to modify it. Professionals generally use gold -added method, cut off in the place where the ring is appropriate, welded a metal of the same material, and then polished and polished to restore the ring to the original state. The advantage of this processing method is that it does not affect the appearance and quality of the ring, but this method is limited to the prime ring, and it is not suitable for the full diamond ring. 3. You can change the ring, wear the ring on other thin fingers or change a way of wear, such as through the necklace through the ring on the neck. This not only looks more personalized, but also modify the neck. Line. 4. Get the jewelry shop that purchases the ring, and ask if there is a new service with the old replacement, you can directly replace a new ring. Of course, you need to make up for a certain difference.
Hello, at this time you can bring your own ring to the local counter to expand it. If it is only expanded, then the machine can be solved. If it is too large, you must change the new ring.
Now you can change the old new, the gold shop can be changed. If you keep an invoice or a member, you can do it, but you can also re -process it. There are gold and silver jewelry processing stores